Fresh Air in 15 minutes or your money back!

Alpine Air Technologies – Blog

HOW TO CLEAN AN AIR PURIFIER

Posted by admin on May 15, 2016 in Air Purification with No Comments


Do you know if you maintain an Air purifier unit properly, you can save greatly on maintenance costs? For example purchasing Replacement parts accessories such as filter and ozone plates. Maintenance of these items can help sustain the life cycle of the Air Purifier unit.

Fresh-Air-LA-3500-V-2.0

Ideally, it is important to clean an air purifier once every month depending on indoor air quality. If you do not have an air purifier manual, here are some step by step guidelines on How to clean an air purifier filter.

1. Unplug the Air purifier from the power outlet.

2. It is recommended to locate the air purifier filter first in other to know the part you need to disassemble.

3. Carefully disassemble the air purifier by Taking off the finger screws at the back of the unit. Pull out the filter after unscrewing, and then pull out the photo catalytic before reaching out for the ozone plates.

4. Use a damp cloth to wipe out the dust particles on the blade and the entire air purifier.

5. The ozone plates can be scrubbed with an old brush using soap and water. Basically, you can let soak the ozone plates for a minimum of 10 minutes depending on how dirty it is to make it easier for scrubbing.

6. After scrubbing the ozone plates, rinse thoroughly and let it air dry completely before putting it back.

7. For the filter, use a damp cloth to wipe it clean and a dry cloth to clean it after wards.

8. After cleaning the filter, allow to dry completely before reassembling the part back to the air purifier after 5 minutes.

9. Reassemble all air purifier parts properly.

10.Plug the air purifier to the power outlet

For more information, please visit http://www.alpineairtechnologies.com/

Leave a Reply

You must be logged in to post a comment.

No trackbacks yet.

Posts with similar tags
Posts in similar categories